Innovate Motorsports LC-2 Digital Wideband "Lambda" O2 Controller With O2 Sensor

(No reviews yet) Write a Review
SKU:
3877
On Sale
  • Innovate Motorsports LC-2 Digital Wideband "Lambda" O2 Controller With O2 Sensor
  • Innovate Motorsports LC-2 Digital Wideband "Lambda" O2 Controller With O2 Sensor
  • Innovate Motorsports LC-2 Digital Wideband "Lambda" O2 Controller With O2 Sensor
Now: $149.95
Was: $189.00

Description

LC-2: Complete Lambda Cable Kit (8 ft.). Includes: LC-2 Controller, Bosch Wideband O² Sensor, 8 Ft. Sensor Cable (Overall length 10 ft.), 1 Mild-Steel Exhaust Bung, *Program Cable, & Manual. P/N: 3877

The evolution of the world’s most popular stand alone digital O² sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes the only 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. The LC-2 can also be daisy-chained for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS). Key features include:

KEY FEATURES

  • Patented DirectDigital™ Wideband Technology
  • Wideband O² Compatible with ALL fuel types
  • Ability to calibrate O² sensor for maximum accuracy
  • Integrated dual-color status LED (Green/Red)
  • *Two configurable linear 0-5v analog outputs
  • Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft
  • Positive lock connectors for all connections
  • Innovate MTS serial in/out
  • Serial connection to your PC
  • Real-time display data on screen and/or with powerful LogWorks software

*Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog Output #1 (Yellow) is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR; Analog Output #2 (Brown) 1.1 volt = 14 AFR and .1 volt = 15 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

Click here to view the complete user guide and installation manual.

Specifications

Power

 
Operating Voltage 9.8V to 16V DC
Input Current, O² heater initial warm-up 2.0A nominal, 3A max
Input Current, O² normal operation 0.8A nominal, 1.1A max

Environmental

 
Operating ambient temperature 0° to 140° F (−17.78° to 60° C)
Storage ambient temperature −40° to 185° F (−40° to 85° C)
Water resistance Splash resistant, non-submersible

Sensors

 
Compatible Types Bosch™ LSU4.2 & Bosch™ LSU4.9
Bosch™ Heater Control Digital PID via pump-cell impedance
Measurements
 
Lambda .5 to 8.0
Air/Fuel Ratio 7.35 to 117 (gasoline), Fuel Type Programmable
Accuracy
 
For Lambda Accurate to +/- .007 (.1 AFR)

Response Time

 
Free Air to Lambda < 100 mS ( < 25 mS typical)
Inputs
 
Serial 1, Innovate MTS Compatible
Outputs
 
Analog 2, 0-5VDC, 10 bit resolution, programmable
Serial 1, Innovate MTS Compatible
Communication
 
Serial MTS (Innovate Modular Tuning System) compatible

Installation and Setup

Installation of the LC-2 is relatively simple. Complete documentation is supplied, and the support pages, videos, application notes and tuner resources can also speed you on your way to effective tuning.

View AllClose