Advanced Search  
 Order Tracking - Account - Cart Contents - Checkout  
GM Cars
  Chevy Camaro (2016+)
  Chevy Camaro (2010-2015)
  Corvette C7 (2014+)
  Corvette C6 (2005-2013)
  Corvette C5 (1997-2004)
  Chevy SS Sedan (2014+)
  LS1 F-Body (1998-2002)
  Pontiac GTO (2004-2006)
  Pontiac G8 (2008+)
  CTS-V Series (2009+)
  CTS-V Series (2004-2007)
  W-Body (Grand Prix, Impala, Monte Carlo)
  LT1 F-body (1993-1997)
  Cadillac ATS (2013+)
  V6 F-Body (1993-2002)
  Cadillac CTS & CTS-V (2016+)
Dodge & Chrysler Cars
  Charger & 300 (2011+)
  Charger & 300 (2005-2010)
  Dodge Challenger (2011+)
  Dodge Challenger (2008-2010)
  Dodge Viper (2003-2007)
Ford Cars
  Ford Mustang (2015+)
  Ford Mustang (2011-2014)
  Ford Mustang (2005-2010)
  Ford Mustang (1994-2004)
  Ford Mustang (1985-1993)
GM Trucks
  GM Gas Truck & SUV (2014+)
  GM Gas Truck & SUV (2007-2013)
  GM Gas Truck & SUV (1999-2006)
  Chevy Trailblazer SS (2006-2009)
  GM Duramax Diesel (2001+)
  Chevy SSR (2003-2006)
Ford Trucks
  Ford F-150 & Raptor (2009+)
  Ford Super Duty (2008-2010)
  Ford Super Duty (2011+)
  Ford F-150 (2015+)
  Ford F-150 Lightning (1999-2004)
  Ford 6.0L Super Duty (2003-2007)
  Ford F-150 (1997+)
Dodge Trucks
  Dodge Ram (2009+)
  Dodge Ram (2002-2008)
  Ram Cummins Diesel (2007.5+)
  Dodge Ram Diesel (2002-2008)
Jeep
  Jeep Grand Cherokee (2011+)
  Jeep Grand Cherokee (2006-2010)
  Jeep Wrangler JK (2007+)
Other Cars
  Subaru BRZ/Scion FRS
  Sport Compact
  Other Truck
Universal
  Engine Parts
  Custom Exhaust Shop
  Gift Certificates
  Uncategorized Exhausts
Information
Contact Us
Terms and Conditions
Privacy Notice
Decal Install Instructions
Customer Feedback
SLP Loudmouth for my charger....WOW

I am really impressed with the guys over here from Maryland Speed. i never write feedback but wow, i...

Read More ...


Anthony L.     

 Click to send in your own feedback
 6 Latest FAQs  more
Where can I see what parts are in stock?
What do each order status mean?
Why does the 2005-2006 Vararam GTO Intake not work on a 2004?
What are your hours of operation?
Does MarylandSpeed ship internationally?
 6 FAQs Categories  more
General FAQ->
Product FAQ

There are two sets of Install Instructions

If Your Decals Have Tape on One Side, Use These Instructions

If Your Decals have Tape on Both Sides, Use These Instructions

 

 

Installing Vinyl Inserts/Overlays without the use of Application Tape
 

I'll give you some directions here on how best to install the vinyl inserts and overlays I have which I do not send with the application tape.  Note:  Application tape is put over the top of the vinyl and used to peel the vinyl away from the its backing and then apply the entire vinyl graphic at once.   Once the vinyl is applied then the application tape is peeled away.  Certain types of inserts and overlays I do not include the application tape with because it is easier to install them without the tape.  Because there is no application tape, the installation is somewhat different than those inserts overlays and graphics which do include the application tape. 

Below you'll see specific details for installing a rear CAMARO insert but the theory will be the same for installing any vinyl graphics which will not be installed with the application tape.

 

blackline.JPG (3017 bytes)

You are going to need a few household supplies to do the install.  You'll need some rubbing alcohol, a sprayer, some cheap liquid dishwashing soap, and some paper towels or cotton rags.

NOTE:  For reflective vinyl, do NOT use water as described on this page.  The engineering grade reflective vinyl that I use has a different type adhesive.  This adhesive sometimes doesn't respond well to installations done using water!  Most times it works fine but in some cases the letters don't stick well and the edges start to peel.  Not using water to aid in the installation will prevent this problem from happening (so long as the surface is clean and free of wax!).

Take your CLEAN and preferably NEW sprayer bottle and fill it about 1/2 way with water.   Now take your cheap (the cheaper the better!) liquid dishwashing soap and put ONE DROP in the sprayer bottle.  Fill up the bottle the rest of the way with water.   What this does for you is allows you some "screw up" room with your vinyl decal.  The soap and water will allow you to adjust your vinyl if you don't get it perfect the first time.  NOTE:  Just because one drop of soap is good, don't think two drops will be better!  If you get too much soap in your water (more than about a drop) it will take hours for your vinyl to dry and stick good to the car and this can cause problems.

camaro03.JPG (109968 bytes)

blackline.JPG (3017 bytes)

You want to start with a clean car!  Wash the car good like you normally would.  After you have completed washing the car, take the rubbing alcohol and a paper towel or rag and go over the area where the vinyl will be placed.  This will remove any wax and oil residue from the area and ensure the vinyl decal will stick good.
camaro04.JPG (88485 bytes)

blackline.JPG (3017 bytes)

With a good clean area, take your spray bottle soap/water mixture and liberally spray one of the areas where you will be placing the vinyl.  In this case, spray the "C" so it is very wet.  Don't skimp with the water... it is cheap and will allow you to correct your mistakes :)
camaro06.JPG (38613 bytes)

blackline.JPG (3017 bytes)

Without delaying, take your piece of vinyl and peel it off its backing.  With the sticky side up (i.e., not stuck to your hand!) Spray this with the soapy water mixture as well.  Spraying both the vinyl and the surface where you will be putting it ensures you get it good and wet.
camaro05.JPG (109859 bytes)

blackline.JPG (3017 bytes)

Now take your vinyl and carefully put in place. DO NOT push it in place until you are sure it is where you want it.  If you are slightly off and need to move it some, very gently pick it off the car, move it, and gently lay it in place.  If you did actually push it down there is a chance it stuck too good for you to pick up without damaging.  You can try but if you feel it sticking real good you may end up stretching or ripping the vinyl when trying to remove it.

Once you get the vinyl in place and it is aligned properly, gently PUSH it down in place.  Push from the center out.  This will help to remove any air bubbles caught between the vinyl and the car.  At this point, depending on the weather and how much soap you used, the letter is probably stuck for good and you will not be able to peel it back up off the car without damaging the vinyl.

camaro07.JPG (67210 bytes)

blackline.JPG (3017 bytes)

This is a picture of pushing the vinyl down while starting in the center and moving towards the outside.  Again, you want to make sure the vinyl is positioned properly before doing this because once the vinyl is firmly pressed against the car it is usually stuck for good.  If it is very humid outside or you used too much soap, you may end up waiting a couple hours or so for it to stick real well.  If this is the case, you might not want to drive your car right away and instead wait for the vinyl to stick good to the car.
camaro08.JPG (70551 bytes)

blackline.JPG (3017 bytes)

Here is the completed project.  Looks good and when done properly, the vinyl will most likely outlive the time you own the car.
camaro10.JPG (101546 bytes)

blackline.JPG (3017 bytes)

Installing F-Body Vinyl Inserts/Overlays With the Use of Application Tape

I'll give you some directions here on how best to install the vinyl inserts and overlays I have which I do  send with the application tape.  Note:  Application tape is put over the top of the vinyl and used to peel the vinyl away from the its backing and then apply the entire vinyl graphic at once.   Once the vinyl is applied then the application tape is peeled away.  Certain types of inserts and overlays I do include the application tape with because it is easier to install them with the tape.  Because there is application tape, the installation is somewhat different than those inserts overlays and graphics which do not include the application tape. 

Below you'll see specific details for installing Z28 overlays but the theory will be the same for installing any vinyl graphics which will be installed with the application tape.

blackline.JPG (3017 bytes)

You are going to need a few household supplies to do the install.  You'll need some rubbing alcohol, a sprayer, some cheap liquid dishwashing soap, scissors, and some paper towels or cotton rags.

NOTE:  For reflective vinyl, do NOT use water as described on this page.  The engineering grade reflective vinyl that I use has a different type adhesive.  This adhesive sometimes doesn't respond well to installations done using water!  Most times it works fine but in some cases the letters don't stick well and the edges start to peel.  Not using water to aid in the installation will prevent this problem from happening (so long as the surface is clean and free of wax!).

Take your CLEAN and preferably NEW sprayer bottle and fill it about 1/2 way with water.  Now take your cheap (the cheaper the better!) liquid dishwashing soap and put ONE DROP in the sprayer bottle.  Fill up the bottle the rest of the way with water.  What this does for you is allows you some "screw up" room with your vinyl decal.  The soap and water will allow you to adjust your vinyl if you don't get it perfect the first time.  NOTE:  Just because one drop of soap is good, don't think two drops will be better!  If you get too much soap in your water (more than about a drop) it will take hours for your vinyl to dry and stick good to the car and this can cause problems.

Z28overlay01.JPG (125427 bytes)

blackline.JPG (3017 bytes)

You want to start with a clean car!  Wash the car good like you normally would.  After you have completed washing the car, take the rubbing alcohol and a paper towel or rag and go over the area where the vinyl will be placed.  This will remove any wax and oil residue from the area and ensure the vinyl decal will stick good. Z28overlay03.JPG (117584 bytes)

blackline.JPG (3017 bytes)

Since in this case we are actually installing an overlay and not just putting a piece of vinyl anywhere on the car, placement of the vinyl on the car is very important.  Because you must place the vinyl exactly in a certain spot in order for it to look right, trim the edges of the vinyl graphic with a pair of scissors.  Get as close as you can because it will make placing the vinyl over the emblem much easier! Z28overlay04.JPG (146320 bytes)

blackline.JPG (3017 bytes)

With everything ready to go, you are now ready to apply the overlay to the emblem.  In order to give yourself a second shot (in case you screw up and you probably will ;) spray down the entire emblem with your soap and water mixture.  Don't skimp with the water... it is cheap and will allow you to correct your mistakes :) Z28overlay07.JPG (167803 bytes)

blackline.JPG (3017 bytes)

You will also want to spray the back side of your vinyl to ensure you get enough water between the vinyl and the emblem.  Peel the application tape away from the vinyl backing.  As you peel the vinyl should come up with the application tape like it has in the picture to the right.  If it doesn't, put the overlay back down and on a flat surface press the application tape down tight onto the vinyl and this should help it stick a little better.  Once you get the application tape and vinyl peeled off the vinyl backing, lay it in your hand and spray it with your soap and water mixture as shown to the right. Z28overlay08.JPG (82468 bytes)

blackline.JPG (3017 bytes)

This is the critical part.  GENTLY place the overlay where it should go on the emblem but do NOT press down on the overlay.   Pressing down firmly will make it stick for good and if it is not in the correct position you may not be able to correct your mistake!  With the overlay gently laying on top of the emblem, ensure it is in the correct position.  If it is not, slowly peel it away, move it slightly, and gently place it back on the emblem.  If you are having trouble seeing where it should be placed it sometimes helps if you wet the application tape... it makes it easier to "see through".  Also, you may need to take it off completely and squirt some more water on the emblem and overlay if it starts to stick on you and you don't want it to.  Take your time here and get it right... this Z28 overlay is probably one of the more difficult ones to install because of all the detail on the emblem.  Once you are certain you have it in the correct position, gently press down on the overlay starting in the center and working your way out.  This will help to remove any air bubbles trapped between the overlay and the emblem.  Rub the overlay onto the emblem firmly once you have worked all the air bubbles out.  Z28overlay10.JPG (94711 bytes)

blackline.JPG (3017 bytes)

After rubbing it for a couple minutes you may be able to remove the application tape.  Gently start at one end and begin peeling the application tape back.  Depending on the weather, how much soap you used, and how long you waited, the vinyl may or may not come up with the application tape.  If the vinyl does start come off the emblem and up with the application tape, STOP... put the application tape back down on the vinyl overlay/emblem and rub more and wait a little longer.  Once it has "dried" long enough, you will be able to gently peel the application tape off while leaving the vinyl overlay on the emblem as shown to the right. Z28overlay11.JPG (88076 bytes)

blackline.JPG (3017 bytes)

Once you have the application tape completely removed you may want to hurry and get the water off the car.  Just be careful and don't rub over the vinyl just yet... give it several hours to dry to ensure it sticks good.  If you rub over it right now there is a chance it could come up.  You have to give the soapy water mixture time to evaporate from under the vinyl IF you didn't "rub" it all out previously.

Well, there you go!  Enjoy!

Z28overlay12.JPG (108458 bytes)

blackline.JPG (3017 bytes)

   Continue

 

Payment Gateway